Concrete Resurfacing – Is This An Easy Home Improvement Project?

Concrete Resurfacing is the perfect way to bring back a tired driveway or patio that has seen better days. Yes, concrete resurfacing is quite a successful and safe procedure that will restore your driveway to appear as new again. Resurfacing concrete means basically replacing the older layer with a new one so that your driveway or patio looks as good as new again. Resurface concrete is basically a method that employs concrete molds to conceal damaged or uneven portions of concrete.

Concrete Resurfacing

There are several concrete resurfacing processes to choose from, but the most popular among these are called self-leveling overlays. Self-leveling involves creating a flat base for the new concrete to rest on, and then you apply a self-leveling product to make the surface level.

Architecture, Blueprint, Floor Plan

On the other hand, self-leveling overlays just like the former, but it requires an additional step to make sure the surface is flat. In applying self-leveling overlays, you will first create a flat base for the overlay, and then you will spread a thin layer of self-leveling product all around the perimeter of the overlay Concrete Resurfacing. This done, you can then run the concrete resurfacing product over the top of the self-leveling.

The process of applying a self-leveling compound to a damaged concrete resurfacing job is very simple. For starters, find yourself a large tarp or other protective covering to use as a shield over your damaged concrete project. Prepare the tarp by wrapping it around the area you are going to work on, making sure that the edges of the tarp and the surrounding ground are firmly secured.

Cut plastic tubing of the same length to fit exactly around the damaged section of the concrete, but make sure the length does not extend beyond the edges of the tarp. Apply the self-leveling compound directly to the surface of the concrete. Work in small, even strokes to avoid leaving unwanted streaks on the damaged surface.

Once you are satisfied that your new surface is smooth and flat, remove the tarp and place the cutting blade of the saw at a 45 degree angle to the surface of the existing concrete surface. You may need to experiment with different angles before you find the one that gives you the best results.

Start with a small area at a time, and keep your cutting teeth as close to the surface as possible. You may also want to practice the process on a scrap piece of scrap board to get the feeling of it in your hands. Spread the concrete resurfacing compound on the cut piece of board until you have a smooth and even coating on it. Make any necessary adjustments until you have a smooth, uniform finish.

When finished, use a clean rag or towel to wipe away the concrete resurfacing compound. Allow the newly refinished concrete surface time to dry. Once the drying period is complete, apply two coats of finishing cement to the newly refinished area. It is advisable to allow a couple hours between coats, but no more than eight hours. When finished, your newly refinished concrete surface should look as good as new!

Concrete Resurfacing isn’t tough to do but can be tedious. If this isn’t enough to convince you that you should consider repairing your existing concrete slab, just think about all of the ways your house could look if it were free of cracks and other imperfections!

By investing in your own concrete resurfacing project, you can have a beautiful repaired surface that will last for years. Not only that, but your home will be safer because you have taken the steps necessary to protect yourself from injury. There’s really no need to let an ugly cracked concrete slab mar your good looks!

Leave a Reply